Today I'm sharing how we made our pallet headboard. Please know we did not take step by step pictures, but I've done my best to explain how we did it.
Let me also say something upfront about this project: our headboard is nailed directly into the wall. I know this isn't feasible for everyone, so before you keep reading this tutorial, I wanted to share that information upfront.
1) 2-3 pallets (depending on the size of your headboard)*
2) tape measure
4) table saw (or hand saw)
5) nail gun
* We chose to purchase our pallets from a business that had stored them inside. We didn't want to take any risks with rotting wood (or bugs!).
1) remove each board from the pallet
2) remove nails from each board you plan to use
3) sand each piece
4) determine a rough size of the headboard
Once you've completed all of the prep work, installing this is quick & easy!
Step Three: starting at the top, start nailing in the smaller pieces to fill in the rest of the headboard. You'll want to stagger the seams, so that you don't end up with a straight line down the the headboard. This part requires some patience, as you will most likely have to cut each piece as you go. Before you leave the room to cut, just make sure to re-measure the empty spot you are looking to fill.
Try to not over think the pattern of the headboard: it is meant to look rustic and imperfect. Here is a closeup of the headboard, so you can get a feeling for just how many gaps there many be between rows.
The spaces don't bother me at all (which says a lot, coming from a perfectionist). If we had to do it all over again, we would have painted the wall behind the headboard a darker color, so that the gaps would be less noticeable.
Please don't hesitate to email if you have any questions!
Happy Monday, friends!
Linking up with
Uncommon Slice of Suburbia